Supported Drive Shaft_Henan Tongxin Transmission Co.,Ltd.

Supported Drive Shaft

Structural Composition

Flange Yoke, Universal Joint Assembly, Circlip, Universal Joint Yoke, Shaft Tube, Intermediate Splined Shaft, Intermediate Support Assembly, Intermediate Flange, Grease Nipple, Nut, Cotter Pin

Product Features

1.After assembly, both flanges at the two ends of the drive shaft are fixed to the vehicle body, and the intermediate support assembly shall also be fixed to the vehicle frame.

2.This structure is applicable to light, medium and heavy-duty series drive shafts; the flanges of the flange yoke and intermediate flange are available in various types: face gear, disc and square flange.

3.The length of the drive shaft can be machined according to customer-specified dimensions.

Structural Parameter Diagram
Technical Data

	Tsmax(N.m)	A	h	B	n-ΦD	α	E	K	S	β	W	H	L1	L2	b	4-M	L	Structure	Middle flange	Supporting assembly	Flange F	Universal joint size
5-1	16500	ISO-8667-T180		150	4-Φ15		14	156	92	35°	100	80	200	30	15		1060	Q1	Ⅰ	Z1	3-5	Φ52×133
5-2	16500	95	2.3	140	8-Φ16.1	45°	12	156	92	35°	100	80	200	30	15		1060	Q2	Ⅱ	Z1	3-7	Φ52×133
5-3	21000	ISO-8667-T180		150	4-Φ15		14	168	102	35°	100	80	200	30	15		1110	Q1	Ⅰ	Z1	3-14	Φ57×144
5-4	21000	95	2.3	140	8-Φ16.1	45°	12	168	102	35°	100	80	200	30	15		1110	Q2	Ⅱ	Z1	3-15	Φ57×144
5-5	21000	110	2.3	155.5	10-Φ16.1	36°	14	168	102	35°	100	80	200	30	15		1110	Q2	Ⅱ	Z1	3-16	Φ57×144
5-6	27000	ISO-8667-T180		150	4-Φ15		14	178	110	25°	110		247	50		4-M12*1.5	2170	Q1	Ⅰ	Z3	3-1	Φ57×152
5-7	27000	110	2.3	155.5	10-Φ16.1	36°	14	178	110	25°	110		247	50		4-M12*1.5	2170	Q2	Ⅱ	Z3	4-3	Φ57×152
5-8	27000	ISO-8667-T180		150	4-Φ15		14	178	110	25°	100	80	200	30	15		2170	Q1	Ⅰ	Z1	4-1	Φ57×152
5-9	30000	ISO-8667-T180		150	4-Φ15		14	195	130	25°	110	90	250	30	17		1360	Q1	Ⅰ	Z1	4-8	Φ62×160
5-10	30000	ISO-8667-T180		150	4-Φ15		14	185	120	25°	100	80	200	30	15		1200	Q1	Ⅰ	Z1	4-9	Φ63.5×152
5-11	44000	ISO-8667-T180		150	4-Φ15		14	185	140	22°	110	90	250	30	17		1410	Q1	Ⅰ	Z1	4-12	Φ68×165(89)
5-12	44000	ISO-8667-T180		150	4-Φ15		14	185	140	22°	128	90					1410	Q1	Ⅰ	Z2	4-12	Φ68×165(89)
5-13	44000	ISO-8667-T180		150	4-Φ15		14	185	140	22°	115.5		310	60		4-M18*1.5	1410	Q1	Ⅰ	Z3	4-12	Φ68×165(89)

Explanation:

1. Tsmax: Maximum instantaneous torque N.m;

2. Lz: Minimum length after compression;

3. La: length compensation amount;

4. Lz+La: maximum working length.

Products

Supported Drive Shaft